На данной странице содержится информация об установке последних загрузок драйверов 10moons с использованием средства обновления драйверов 10moons.
Драйверы 10moons представляют собой небольшие программы, которые позволяют оборудованию 10moons взаимодействовать с программным обеспечением операционной системы. Постоянное обновление программного обеспечения 10moons предотвращает сбои и максимально повышает производительность оборудования и системы. Использование устаревших или поврежденных драйверов 10moons может привести к системным ошибкам, сбоям и отказу оборудования или компьютера. Болеет того, установка неправильных драйверов 10moons может сделать эти проблемы серьезнее.
Совет: если вы не знаете, как обновлять драйверы устройств 10moons вручную, мы рекомендуем загрузить служебную программу для драйверов 10moons . Этот инструмент автоматически загрузит и обновит правильные версии драйверов 10moons, оградив вас от установки неправильных драйверов 10moons .
Об авторе: Джей Гитер (Jay Geater) является президентом и генеральным директором корпорации Solvusoft — глобальной компании, занимающейся программным обеспечением и уделяющей основное внимание новаторским сервисным программам. Он всю жизнь страстно увлекался компьютерами и любит все, связанное с компьютерами, программным обеспечением и новыми технологиями.
Windows Driver Download Center
- 10moons Drivers Download
- Browse
- Share us
- Knowledge Base
- Comments
- boubouh commented Jul 25, 2018
- This comment has been minimized.
- spbnick commented Aug 12, 2018
- This comment has been minimized.
- boubouh commented Aug 29, 2018
- This comment has been minimized.
- spbnick commented Aug 30, 2018
- This comment has been minimized.
- boubouh commented Aug 30, 2018 •
- This comment has been minimized.
- spbnick commented Sep 1, 2018
- This comment has been minimized.
- boubouh commented Sep 1, 2018
- This comment has been minimized.
- boubouh commented Sep 1, 2018
- This comment has been minimized.
- spbnick commented Sep 3, 2018
- This comment has been minimized.
- boubouh commented Sep 4, 2018
- This comment has been minimized.
- spbnick commented Sep 8, 2018
- This comment has been minimized.
- Ticoeddy commented Dec 1, 2018
- This comment has been minimized.
- mosheliv commented Dec 4, 2018
- This comment has been minimized.
- crxssrazr93 commented Jan 2, 2019
- This comment has been minimized.
- alex-s-v commented Jan 6, 2019
- This comment has been minimized.
- DegradedMind commented Feb 6, 2019 •
10moons Drivers Download
This page contains the list of 10moons drivers available for download. To download the proper driver, please find the category of your 10moons device and click the link.
If you could not find the exact driver for your hardware device or you aren’t sure which driver is right one, we have a program that will detect your hardware specifications and identify the correct driver for your needs. Please click here to download.
Browse
Share us
Knowledge Base
This website is not affiliated with 10moons. All company names/logos are properties of their owners.
Copyright© Driver Scape 2019. All rights are reserved.
Copy link Quote reply
please Add support for 10moons 10*6 inch graphic table. It looks like Huion 1060 Plus Tablet which is already supported.
Copy link Quote reply
We cannot add support for it unless somebody provides us with the tablet, or with the data about the tablet. If you have it, please provide the output of lsusb with the tablet connected, for the start.
Copy link Quote reply
hi spbnich
thank you for reply .
lsusb output :
acutely the tablet works fine . it needs just to configure the buttons and the pressure sensitivity
Copy link Quote reply
@boubouh, which of those lines would be your tablet?
Copy link Quote reply
Bus 002 Device 002: ID 08f2:6811 Gotop Information Inc.
Copy link Quote reply
I don’t remember ever seeing this VID:PID pair. Could you please try running uclogic-probe on it and posting results?
Copy link Quote reply
Hi @spbnick .
this is the result of sudo uclogic-probe 2 2 :
Copy link Quote reply
sudo uclogic-probe 2 2 | uclogic-decode
output:
Copy link Quote reply
Thank you @boubouh, your tablet seems to be incompatible with UC-Logic tablets. Please proceed to the regular diagnostics procedure.
Copy link Quote reply
Copy link Quote reply
Thank you, @boubouh. I took a look at the diagnostics you posted and it’s definitely not something I’ve seen before. The tablet reports coordinates and pressure, but, as is, their resolution is very far from advertised. I could also not see proximity reports in the dumps, which makes driver implementation more difficult, plus I didn’t find any reports for buttons on the side of the pen (not sure if you pressed them or not).
In theory, it would be possible to implement a driver on the tablet as is, but the input quality would be low, and I don’t think we would be able to do much with the buttons on the frame. This would be not very useful, so the work to support this tablet would go to the end of my queue (which is not getting shorter).
One thing you could do is to find a Windows install, capture USB traffic for tablet initialization, and the diagnostics routine you did earlier. If you’re up to that, write, and I’ll give you a few tips on how to do that. We might be able to find a way to make it work then.
I might buy this tablet myself out of curiosity and try to make it work, but I cannot promise that, and it will take a while to deliver anyway. You can of course send me one yourself, alternatively.
Copy link Quote reply
We cannot add support for it unless somebody provides us with the tablet, or with the data about the tablet. If you have it, please provide the output of lsusb with the tablet connected, for the start.
Good morning, Gentlemen. I am a newcomer to the site and this is my first comment in this group.
I have an unpack 10moons 6×10 in graphic tablet I have not been able to use, cause I intend to use with BricsCad application running in a corporate laptop that will not allow a (unsigned) generic driver to run, which is the one I’ve got from manufacturer.
Any clues? Or Do we have any use for my tablet?
Copy link Quote reply
+1 for me.
Just saying that this is the second most popular tablet on ali express, so probably userbase is large.
Copy link Quote reply
Any updates? Planning get this or the Huion H430P.
Copy link Quote reply
Hello @spbnick. I captured USB traffic in Windows with native drivers installed. But I used the different tablet, the 10moons 6×4 inches one if it’s inappropriate I will open a new issue. Files descriptors.txt and hid_report_descriptors.txt are obtained in Linux and .txt is a real format, but others captured using Wireshark in Windows and have .pcapng as a native format, I just renamed it to upload (GitHub swearing on me for some reason for .pcapng format).
descriptors.txt
frame_buttons.txt
hid_report_descriptors.txt
pen_buttons.txt
pen_coords.txt
pen_pressure.txt
Copy link Quote reply
A new version of the tablet came out — T503. Old version — T501. You can no longer buy T501.
The manufacturer claims that the new version (T503) has increased resolution — 5080 LPI: http://eng.10moons.com/info5529.html
Old version (T501) was claimed to have 2540 LPI.
The official webpage (http://eng.10moons.com/info5529.html) was updated recently. Before the update the page claimed that T503 had 2540 LPI, not 5080 LPI. The seller said that the official page hasn’t been updated since the new version came out, so it said 2540 LPI, because the page served to be for old model (T501).
Is it possible to find out the real resolution with the help of uclogic-tools ? And is it possible to write a Linux driver for this tablet? I don’t code and I am not an extensive Linux user. Don’t have a clue how to make drivers.
uclogic-probe * * | uclogic-decode output is this:
| Manufacturer: SZ PING-IT INC.
| Product: [T503] Driver Inside Tablet
Pen tip tablet surface touch (00 C1 00 00 00 00 00 00)
pen_coordinates_up.txt
pen_coordinates_down.txt
Y position (00 00 00 00 00 00 00 00)
Y position in segments (00 00 00 00 00 00 00 00) — Increases from up to down: 00 — 09 then 0A — 0F.
pen_coordinates_left.txt
pen_coordinates_right.txt
X position (00 00 00 00 00 00 00 00)
X position in segments (00 00 00 00 00 00 00 00) — Increases from right to left: 00 — 09 then 0A — 0F.
pen_tilt.txt
Pen tilt (00 00 00 00 00 00 00 00)
pen_pressure.txt
Pen pressure (00 00 00 00 00 00 00 00): From 01 to 07.
pen_button1.txt
03 02 00 00 00 — Press
03 00 00 00 00 — Release
pen_button2.txt — Can’t find what it dumps.
tablet_buttons.txt
Even without the proprietary driver installed, the tablet works, but not entirely:
Issues:
- X and Y movements are interpreted incorrectly, switched, inversed — by moving up, the cursor goes left; by moving down, the cursor goes right; by moving right, the cursor goes up. by moving left, the cursor goes down:
Up = Left
Down = Right
Right = Up
Left = Down
- The cursor periodically bounces:
Pen tip clicking, double-clicking, pen button 1 and pressure works (Tested in Krita). Pen tilting doesn’t. Don’t know if it does or not in other applications.
On Windows all works fine.
Update: I have noticed that the issue is present and identical on Android as it is on Linux, except for cursor randomly bouncing on Linux. It is said that the Android version should be 6.0 and higher. I have 4.2.1. I have installed Android x86 6.0 on my PC and the issue was also present there. I asked the seller about it and he send me this instruction:
It works, but the interface of the app is still vertical orientated, so It is a little uncomfortable to use it.
|
