Cl invalid buffer size

GTHack

Свой человек

Приобрёл PowerColor Red Dragon RX 460 2Gb
Память Hynix

Windows 10 x64
Драйвера drivers_dag_fix_beta 22.19.659.1
Оперативка 4Гб
Своп 16гб

Не могу запустить майнинг под cryptonight (да вообще никакой не могу запустить)

xmr-stak-amd при запуске пишет ошибку
"Error CL_INVALID_BUFFER_SIZE when calling clCreateBuffer to create hash scratchpads buffer."

claymore10.2 запускается, но показывает нулевой хэшрейт
xmrig-amd тоже стартует, но показывает нулевой хэшрейт

биос по началу не шил
потом накатил родной биос но с разлоченными шрейдерами — результат не изменился

System Information

Windows 7 64 bit Core2Quad CPU Q9300
Asus P5Q
AMD Radeon HD 7770
Driver version 15.30.1025-151117a-296575C
Open CL Version 2.0.4.0
Open GL Version 6.14.10.13416

Blender Version

Broken: (example: 2.69.7 4b206af, see splash screen)

CPU Rendering works fine

Short description of error

GPU Rendering is stopped after BVH Tree Building with following error message:

Open CL Error (-61) : CL invalid Buffer size in cl create buffer

Good day,
I have been pulling my head trying to plot my drive.
I have spent the better part of two day read and get it going.
I’m about to throw the 5tb at the monitor.

[ERROR][-61][CL_INVALID_BUFFER_SIZE] Unable to create the OpenCL GPU buffer
At this point I would like to see if someone can teamviewer and provide direct assistance so i can get better configurations.
thanks
Bob

@kendrew post your devices.txt and the gpu plot command line

Unable to create the OpenCL GPU buffer

Errorr (-61 = CL_INVALID_BUFFER_SIZE), it is due to a lack of memory space in your GPU. Try with a lower stagger size.
Note: the number of nonces must be a multiple of the stagger size

@iKnow0
[0] Intel(R) OpenCL (OpenCL 1.2 )
[0] Intel(R) Pentium(R) CPU G3220 @ 3.00GHz (OpenCL 1.2 (Build 10094))
[1] AMD Accelerated Parallel Processing (OpenCL 2.0 AMD-APP (2117.13))
[0] Ellesmere (OpenCL 2.0 AMD-APP (2117.13))
[1] Ellesmere (OpenCL 2.0 AMD-APP (2117.13))
[2] Ellesmere (OpenCL 2.0 AMD-APP (2117.13))
[3] Ellesmere (OpenCL 2.0 AMD-APP (2117.13))
[4] Ellesmere (OpenCL 2.0 AMD-APP (2117.13))
[5] Intel(R) Pentium(R) CPU G3220 @ 3.00GHz (OpenCL 1.2 AMD-APP (2117.13))

@kendrew can you also post the command line that you are using with gpuPlotGenerator. How many GPU cards have you installed?

@kendrew your devices.txt should contain something like the following
0 0 12288 192 8192

@kendrew in the folder where gpuPlotGenerator is located there is a text file "devices.txt" open it with notepad

for devices.txt these are safe settings for most of cards i think
i specifically adjusted it for my R9 270x 2GB card
0 0 1792 128 4096

depending on how much RAM your card has you can change 4096 number

Оцените статью
Много толка
Добавить комментарий